Brunei dry pressing forming die

Dry pressing forming mold is used for one-way hydraulic press or two-way hydraulic press to form a mold by pressing ceramic, refractory or other metal powder with organic binder and moisture less than 8%. Dry pressing mold has simple mold and complex mold. According to the mold material, it is divided into steel mold and hard alloy mold. According to the size of the product, it can press one or more pieces at a time, and it can be divided into single-cavity mold and multi-cavity mold. According to the different pressed products, it can be directly called by the name of the formed products, such as lining brick mold, lattice brick mold, sagger mold, etc.

Category:

BruneiProducts

BruneiIndustry Center

BruneiCeramic mobile phone backboard industry

BruneiCeramic bulletproof board industry

BruneiAlumina porcelain parts industry

BruneiZirconia Porcelain Parts Industry

BruneiSilicon Carbide Ceramic Parts Industry

BruneiSilicon Nitride Ceramic Parts Industry

Bruneidry pressing forming die

BruneiForming die

Phone:400-888-8888

Inquire

Product Description

dry pressing forming die is a die used for one-way hydraulic press or two-way hydraulic press to form ceramic porcelain, refractory material or other metal powder with water content less than% and organic binder. According to the complexity of the product, the dry pressing mold can be divided into simple mold and complex mold. According to the mold material, it can be divided into steel mold and hard alloy mold. According to the size of the product, it can be pressed one or more pieces at a time, and it can be divided into single-cavity mold and multi-cavity mold. According to the different uses of the pressed product, it can be directly called according to the name of the required formed product, such as lining brick mold, such as lattice brick mold, etc. The specification of

die is generally nominal according to the plane size and number of cavities. For example, the high aluminum lining brick die with double cavity inlaid hard alloy side plates with blank size of 180 X100X60 is marked as MCH180X100-2W , I .e. the die side is closed with 180 X100-2 ; And so on.

When ordering, the customer shall provide the blank shape and size drawings, powder compression ratio (blank density: powder bulk density), pressing rebound coefficient (blank size: mold cavity size) and other parameters, or indicate the maximum filling depth, put forward the mold material and external dimension requirements, or explain which model to match.

BruneiRubber isostatic pressing die

BruneiDry bag type warm isostatic press

: next page