Products


Classification by industry

Classification by mechanical model

No data

No data

MUCH PRODUCTS

Alumina porcelain parts industry

Polyurethane isostatic pressing mold

Polyurethane isostatic forming mold is used for wet bag isostatic press or dry bag isostatic press as a soft mold for transferring pressure, also known as envelope. It is a soft mold obtained by enlarging the size of the blank according to proportion, but it is relatively hard and has a certain supporting strength to be shaped. It can be filled with powder or sealed into the preformed blank and put into liquid for isostatic pressing, also known as wet bag isostatic pressing. It can also be made into a dry bag polyurethane isostatic pressing mold of suitable size for dry bag isostatic pressing.

Learn More

dry pressing forming die

Dry pressing forming mold is used for one-way hydraulic press or two-way hydraulic press to form a mold by pressing ceramic, refractory or other metal powder with organic binder and moisture less than 8%. Dry pressing mold has simple mold and complex mold. According to the mold material, it is divided into steel mold and hard alloy mold. According to the size of the product, it can press one or more pieces at a time, and it can be divided into single-cavity mold and multi-cavity mold. According to the different pressed products, it can be directly called by the name of the formed products, such as lining brick mold, lattice brick mold, sagger mold, etc.

Learn More

Integral cold isostatic press

1. Features Integral cold isostatic press structure: steel wire winding working cylinder, laminated plate frame, working cylinder lifting type, upper discharge, medium does not overflow. Pressurization mode: high-pressure pump water pre-pressurization, hydraulic booster pressurization system. Working medium: anti-rust water-based fluid. 2. It is mainly used for isostatic pressing of smaller parts such as alumina, zirconia, silicon nitride, cemented carbide, rare earth permanent magnet materials, etc.

Learn More

Two-way special ceramic hydraulic press

Features of two-way special ceramic hydraulic press The upper and lower cylinders of two-way special ceramic hydraulic press are the same size, which can realize simultaneous pressure up and down, and the pressing action can realize full automation.

Learn More

Two-way floating mold frame hydraulic press

1. Features of Two-way Floating Mold Frame Hydraulic Press The two-way floating mold frame hydraulic press is actually an upper two lower one hydraulic press. The upper main oil cylinder and the lower main oil cylinder are equal in size, which can realize multiple exhaust, two-way pressurization, mold frame floating protection demoulding, and the pressing action can realize full automation.

Learn More

Bar tube dry bag isostatic press

The dry bag isostatic press adopts prestressed steel wire winding working cylinder, prestressed steel wire winding frame, mobile lower bearing platform, lower discharging, hydraulic pre-pressurization, supercharger pressurization system and rubber liner isolation. Mainly used for alumina, zirconia, silicon nitride, hard alloy, magnetic materials or other similar materials, thin rods or tubes of isostatic pressing.

Learn More

Vertical cold isostatic press

The vertical cold isostatic press adopts the prestressed steel wire winding structure, which has high fatigue strength, reasonable force, safety and reliability, compact structure and light weight. It is mainly used for the forming of semi-finished parts of powder products before sintering and the preforming of hot isostatic pressing blank. The pressed products have high density, uniform density distribution and good isotropic properties. They are widely used in powder products of various cemented carbide, refractory materials, magnetic materials, ceramics, graphite, non-ferrous metals and high specific gravity alloys.

Learn More
< 1 >