City Product Center_1-MUCH machinery

PRODUCTS CENTER

1. Features Integral cold isostatic press structure: steel wire winding working cylinder, laminated plate frame, working cylinder lifting type, upper discharge, medium does not overflow. Pressurization mode: high-pressure pump water pre-pressurization, hydraulic booster pressurization system. Working medium: anti-rust water-based fluid. 2. It is mainly used for isostatic pressing of smaller parts such as alumina, zirconia, silicon nitride, cemented carbide, rare earth permanent magnet materials, etc.

AG Two-way floating mold frame hydraulic press

1. Features of Two-way Floating Mold Frame Hydraulic Press The two-way floating mold frame hydraulic press is actually an upper two lower one hydraulic press. The upper main oil cylinder and the lower main oil cylinder are equal in size, which can realize multiple exhaust, two-way pressurization, mold frame floating protection demoulding, and the pressing action can realize full automation.

AG Vertical cold isostatic press

The vertical cold isostatic press adopts the prestressed steel wire winding structure, which has high fatigue strength, reasonable force, safety and reliability, compact structure and light weight. It is mainly used for the forming of semi-finished parts of powder products before sintering and the preforming of hot isostatic pressing blank. The pressed products have high density, uniform density distribution and good isotropic properties. They are widely used in powder products of various cemented carbide, refractory materials, magnetic materials, ceramics, graphite, non-ferrous metals and high specific gravity alloys.

< 1 >