City Product Center_1-MUCH machinery

PRODUCTS CENTER

Polyurethane isostatic forming mold is used for wet bag isostatic press or dry bag isostatic press as a soft mold for transferring pressure, also known as envelope. It is a soft mold obtained by enlarging the size of the blank according to proportion, but it is relatively hard and has a certain supporting strength to be shaped. It can be filled with powder or sealed into the preformed blank and put into liquid for isostatic pressing, also known as wet bag isostatic pressing. It can also be made into a dry bag polyurethane isostatic pressing mold of suitable size for dry bag isostatic pressing.

DO dry pressing forming die

Dry pressing forming mold is used for one-way hydraulic press or two-way hydraulic press to form a mold by pressing ceramic, refractory or other metal powder with organic binder and moisture less than 8%. Dry pressing mold has simple mold and complex mold. According to the mold material, it is divided into steel mold and hard alloy mold. According to the size of the product, it can press one or more pieces at a time, and it can be divided into single-cavity mold and multi-cavity mold. According to the different pressed products, it can be directly called by the name of the formed products, such as lining brick mold, lattice brick mold, sagger mold, etc.

DO Integral cold isostatic press

1. Features Integral cold isostatic press structure: steel wire winding working cylinder, laminated plate frame, working cylinder lifting type, upper discharge, medium does not overflow. Pressurization mode: high-pressure pump water pre-pressurization, hydraulic booster pressurization system. Working medium: anti-rust water-based fluid. 2. It is mainly used for isostatic pressing of smaller parts such as alumina, zirconia, silicon nitride, cemented carbide, rare earth permanent magnet materials, etc.

DO Two-way special ceramic hydraulic press

Features of two-way special ceramic hydraulic press The upper and lower cylinders of two-way special ceramic hydraulic press are the same size, which can realize simultaneous pressure up and down, and the pressing action can realize full automation.

< 1 2 >